##### Page tree
Go to start of banner

# Linear prediction

You are viewing an old version of this page. View the current version.

Version 14

Speech is a continuous signal, which means that consecutive samples of the signal are correlated (see figure on the right). In particular, if we know a previous sample xn-1, we can make a prediction of the current sample, $$\hat x_n = x_{n-1},$$ such that $$\hat x_n \approx x_n.$$ By using more previous samples we have more information, which should help us make a better prediction. Specifically, we can define a predictor which uses M previous samples to predict the current sample xas

$\hat x_n = - \sum_{k=1}^M a_k x_{n-k}.$

This is a linear predictor because it takes a linearly weighted sum of past components to predict the current one.

The error of the prediction, also known as the prediction residual is

$e_n = x_n - \hat x_n = x_n + \sum_{k=1}^M a_k x_{n-k} = \sum_{k=0}^M a_k x_{n-k},$

where a0=1. This explains why the definition $$\hat x_n$$ included a minus sign; when we calculate the residual, the double negative disappears and we can collate everything into one summation.

A short segment of speech. Notice how consecutive samples are mostly near each other, which means that consecutive samples are correlated. Using vector notation, we can make the expressions more compact

$e = Xa$

where

$e = \begin{bmatrix}e_0\\e_1\\\vdots\\e_{N-1}\end{bmatrix},\qquad X = \begin{bmatrix}x_0 & x_{-1} & \dots & x_{M} \\x_1 & x_0 & \dots & x_{M-1} \\ \vdots & \vdots & & \vdots \\ x_{N-1} & x_{N-2} & \dots & x_{N-M} \end{bmatrix}, \qquad a = \begin{bmatrix}a_0\\a_1\\\vdots\\a_{M}\end{bmatrix}.$

Here we calculated the residual for a length N frame of the signal.

Vector a holds the unknown coefficients of the predictor. To find the best possible predictor, we can minimize the minimum mean-square error (MMSE). The square error is the 2-norm of the residual, $$\|e\|^2=e^T e$$ . The mean of that error is defined as the expectation

$E\left[\|e\|^2\right] = E\left[a^T X^T X a\right] = a^T E\left[X^T X\right] a = a^T R_x a,$

where $$R_x = E\left[X^T X\right]$$ and $$E\left[\cdot\right]$$ is the expectation operator. Note that, as shown in the autocorrelation section, the matrix Rx, can be usually assumed to have a symmetric Toeplitz structure.

If we would directly minimize the mean-square error  $$E\left[\|e\|^2\right],$$ then clearly we would obtain the trivial solution a=0, which is not particularly useful. However that solution contradicts with the requirement that the first coefficient is unity, a0=1. In vector notation we can equivalently write

$a_0-1=u^T a -1=0, \qquad\text{where}\,u=\begin{bmatrix}1\\0\\0\\\vdots\\0\end{bmatrix}.$

The standard method for quadratic minimization with constraints is to use a Langrange multiplier, λ, such that the objective function is

$\eta(a,\lambda) = a^T R_x a - 2\lambda\left(a^T u - 1\right).$

This function can be heuristically interpreted such that λ is a free parameter. Since our objective is to minimize $$a^T R_x a$$ if   $$a^T u - 1$$ is non-zero, then the objective function can become arbitrarily large. To allow any value for λ, the constraint must therefore be zero.

The objective function is then minimized by setting its derivative with respect to a to zero

$0 = \frac\partial{\partial a}\eta(a,\lambda) = \frac\partial{\partial a} \left[a^T R_x a -2\lambda\left(a^T u - 1\right)\right] = 2 R_x a - 2 \lambda u.$

It follows that the optimal predictor coefficients are found by solving

$R_x a = \lambda u.$

Since Rx, is symmetric and Toeplitz, the above system of equations can be efficiently solved using the Levinson-Durbin algorithm with algorithmic complexity O(M2). However, note that with direct solution we obtain $$a':=\frac1\lambda a = R_x^{-1}u$$ that is, instead of a we get a scaled with λ. However, since we know that a0=1, we can find a by $$a=\lambda a' = \frac{a'}{a'_0}.$$

Linear prediction is usually used to predict the current sample of a time-domain signal xn. The usefulness of linear prediction however becomes evident by studying its Fourier spectrum Specifically, since e=Xa, the corresponding Z-domain representation is

$E(z) = X(z)A(z)\qquad\Rightarrow\qquad X(z)=\frac{E(z)}{A(z)},$

where E(z), X(z), and A(z), are the Z-transforms of en, xn and an, respectively. The residual E(z) is white-noise, whereby the inverse A(z)-1, must follow the shape of X(z).

In other words, the linear predictor models the macro-shape or envelope of the spectrum.

Linear prediction has a surprising connection with physical modelling of speech production. Namely, a linear predictive model is equivalent with a tube-model of the vocal tract (see figure on the right). A useful consequence is that from the acoustic properties of such a tube-model, we can derive a relationship between the physical length of the vocal tract L and the number of parameters M of the corresponding linear predictor as

$M = \frac{2f_sL}c,$

where fs is the sampling frequency and c is the speed of sound. With an air-temperature of 35 C, the speed of sound is c=350m/s. The mean length of vocal tracts for females and males are approximately 14.1 and 16.9 cm. We can then choose to overestimate L=0.17m. At a sampling frequency of 16kHz, this gives  $$M\approx 17$$ . The linear predictor will catch also features of the glottal oscillation and lip radiation, such that a useful approximation is $$M\approx {\text{round}}\left(1.25\frac{f_s}{1000}\right)$$ . For different sampling rates we then get the number of parameters M as

fsM
8 kHz10
12.8 kHz16
16 kHz20

Observe however that even if a tube-model is equivalent with a linear predictor, the relationship is non-linear and highly sensitive to small errors. Moreover, when estimating linear predictive models from speech, in addition to features of the vocal tract, we will also capture features of glottal oscillation and lip-radiation It is therefore very difficult to estimate meaningful tube-model parameters from speech. A related sub-field of speech analysis is glottal inverse filtering, which attempts to estimate the glottal source from the acoustic signal. A necessary step in such inverse filtering is to estimate the acoustic effect of the vocal tract, that is, it is necessary to estimate the tube model.

A tube model of the vocal tract consisting of constant-radius tube-segments Linear prediction has been highly influential especially in early speech coders. In fact, the dominant speech coding method is code-excited linear prediction (CELP), which is based on linear prediction.

• No labels